Hi,
As you said you are getting error after system copy when you are doing the delta load and full load is working fine for you.
This mainly happens due to init disturbance in the source system.
I would suggest you to delete the init and rerun the Init from BW once again.
This should solve your problem.
Thanks
Mayank
Hi,
I think you have not installed the data flow properly. As I told that you should get the data flow at least till DSO. Can you post your data flow screen shot?
We are using 2LIS_17_I3HDR and 0PM_OM_OPA_2. Standard flow has been installed till DSO.
Regarding RSA3 records, you have to take one PM order and analyze in ECC side, about how the data gets generated.
Regards,
Suman
Hi Mr Kapadia.
I saw that but not sure of the specifics. You said the issue was that u had created full for both 0asset_attr_text and 0asset_Afab_attr.
To correct it what did you use, this sequence from RAM?
0ASSET & 0ASSET___T - Delta
(0ASSET_AFAB_TEXT - Full
0ASSET_AFAB_ATTR - Delta
Attr Change Run
0FI_AA_11 - Delta.
?
Hi,
Ideally it should not happen in the same request, Even if they are coming twice in PSA which ( I think should not happen)....
I hope you should have one standard DSO getting loaded via this.....the change log will take care of duplicate entries....
Thanks
Mayank
Hi, Mr Kapadia.
I cannot clearly understand you about deletion flag.
My situation is:
I have table in Source system and I extract data from this table with FM. But when data is deleted in source system, I cannot catch this data, because these records only disappear from table.
Regards, Fanil.
Hi again,
I do not have system access now for the customer. However idea was to do "Init Load" for all the master data sources (ie. 0asset_attr_text and 0asset_Afab_attr) and then subsequently do the "Delta load" via process chain.
And delta info packages for above datasources were included in the process chain to run it successfully each time.
Note: sequence which i used was right from begining (as it was from SAP business content help) only thing i missed was data load mode. (It was full , and it should be Init and then delta subsequently)
I hope it helps.
Regards
Mr Kapadia
Hi Ram, Kapadi,
In order to initialise in this order : -> How do we initalise the 0ASSET_AFAB_TEXT as it is a full load?
0ASSET & 0ASSET___T - Delta
(0ASSET_AFAB_TEXT - Full - > How do we initalise this?
0ASSET_AFAB_ATTR - Delta
Attr Change Run
0FI_AA_11 - Delta.
Thank you Both!
well, as I said, i am not really looking for a Bex solution. I want to show Multiple currency using the same Key figure. I think the only way to get this done is enable the Group currency which comes through the extractor. But I am not sure if this is a viable option for 2LIS* extractors?
Kedar
Hi,
Before writing the Code, Append the structure in the standard Data source.
After writing the Code, save and activate the Code.
Then Uncheck the Hide Checkbox from RSA6 -> double click the data source -> Uncheck ur enchanced field.
Once saved, Run the TCODE RSA3 by giving ur data source and execute.
Check whether, data is populating for your enchanced field. It will work out.
Thanks.
Hi Sonal,
Usually if any posting happens, immediately it will be updated in Application tables.
With some time later the data will be Updated in Extraction queue or Update tables. It depends upon delta type.
Please run the TCODE SM13 and check whether any postings are struck over there.
Thanks.
Hi All,
We would like to have RESOLVER_NAME in SC Approval reporting and this field is in the 0BBP_TD_SC_APPR_1 datasource.
I do see this RESOLVER_NAME field available in /SAPSRM/D_WF_003 table in SRM but not able to get the relation to enhance to 0BBP_TD_SC_APPR_1 datasource to bring into BW system.
Please let us know if you anybody come across this situation.
Thanks
Hi
First you append the structure and then unhide the field, and then go to the cmod and then write the customer exit code to populate the data as per the business requirement .
Please follow the below link
Hi Kumar,
I am not sure whether you were successfull in finding these BCT objects ..as I am also looking for them now..?
Appreciate if you can share across incase you found...
Cheers,
Ram
We activated extractor 0FI_AR_6 in our R/3 system.
When we now try to check the data via RSA3 we always get 0 results (although we have data in table KNC1).
When we load the data to our BW system we get 630.400 results.
How is this possible?
Kind regards,
Lieselot
Hi Eecke,
Which Mode you are running the extractor in RSA3 . Are you following the same while running the Info Package in BW.
It appears you are running in delta update mode in RSA3 and full update mode in BW.
Thanks
Kamal
Hi,
Is it a full extract or delta extract done from RSA3?.
Can i know what values are maintained in table " BWOM_SETTINGS" which you can check in SE16.
Srikanth.
Hi Lie,
below points may consider:
1. While running RSA3, you may not used selections on fiscal year or period
2. you may used mode as D
Please check at info package, selection tab- there might be provided some selections. if yes then.my first point will be the reason.
for FI data source we need to give certain selections at RSA3, other wise it won't show as my guess.
Thanks
Hope you are trying to run in D mode in RSA3. I suspect your safety time limits are causing the delay of delta records to RSA7 and in RSA3.
Check this table : BWOM2_SAFETY table
You can check the last delta timestamp in BWOM2_TIMEST table
Regards,
Suman
The data was uploaded in BW through update mode: Initialize Delta Process >> Initialization with Data Transfer with selection parameters FISCPER > 001.2009
In RSA3: if I select update mode =
F ---> 0 results
D ---> errors occurred during the extraction (Could not determine BW release of logical system '')also 0 results (forgot to enter my target system in previous answer)
@SRIKANTH: I have no records in table BWOM_SETTINGS for datasource 0FI_AR_6
@Ramanjaneyulu: if I add the same selections on FISCPER in RSA3 I still get no results
@Suman: I have no records in table BWOM2_SAFETY and in BWOM2_TIMEST I see date = 10/07/2013 and time = 15:01:58 (is the time of my init load to BW)
Kind regards,
Lieselot
Hi ,
Reinstall the DS from Business Content using RSA5 .
Replicate the same in BW .
Do and init with data transfer .
Check RSA3 with update mode as "full" . This should match with number of records in init with data transfer.
Also please note it takes time in updating data in relevant BW Extraction Tables in source system so if some document got posted recently it would not be avaialble immediatly in RSA7 and so in RSA3 .
Please check the Document http://scn.sap.com/people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part1
Thanks
Kamal